Boat Forum / Building / August 2006

<snip>

It's like fairing out a boat.

When your arms feel like they are going to drop off, you're done.

Seriously, I'd put 3-4 coats of epoxy on first, totally encapsulating
the wood, followed by 4-6 coats of varnish.

The varnish protects the epoxy, the epoxy protects the wood.

Lew

What Lew said . . .

However, I would test THIS varnish, first. If it is a 'true' SPAR {long oil}
varnish, it will never really cure. This means while it WILL protect the
wood {or epoxy}, it will be always soft & 'sticky' - especially in your
temperatures. A 'short oil' varnish, with UV additives would cure HARD.

Since you seem to have the McCloskey 'on-hand', just give a chunk of scrap a
couple of coats & put it outside for a week or so. If it's still seems soft
& very slightly 'tacky' at noon, . . . there's your answer. West Marine
'house brand' is what I typically use. However there are a number of others.
In fact, there is a new item, from Minwax I believe, that should be on the
Home Depot shelf. It SPECIFICALLY states, ' . . . with UV additives for
EXTERIOR use . . .', or some such.

I also have some 'Man-O-War' on the shelf . . . for home trim projects. I've
known about the brand all my life. Just LOVE the name.

Regards & Good Luck,
Ron Magen
Backyard Boatshop