Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsBoatsPaddle BoatsSailingCruisingBuildingElectronics
Related Topics
CarsMotorcyclesMore Topics ...

Boat Forum / Building / January 2007



Tip: Looking for answers? Try searching our database.

low ratio self tailing winches?

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Shaun Van Poecke - 20 Jan 2007 09:08 GMT
has anyone heard of low ratio (say, 6:1) self tailing winches?  I really
dont need a high powered wicnh for my boat, but it sure would be nice to
have a couple of self tailers as well as a couple of standards to make life
a bit easier as i mostly sail solo.  The offerings ive seen from the big
companies only have self tailers in 16:1 and better and start at around
AU$600

Thanks,
Shaun
Garland Gray II - 20 Jan 2007 13:26 GMT
Andersen makes a 9.5:1.
Less than that and you are probably talking an ungeared winch.
Perhaps you could use a "Wincher", the blue rubber ring.

> has anyone heard of low ratio (say, 6:1) self tailing winches?  I really
> dont need a high powered wicnh for my boat, but it sure would be nice to
[quoted text clipped - 5 lines]
> Thanks,
> Shaun
CAH - 20 Jan 2007 20:29 GMT
The blue wincher rings as far as I know not worth the try.

www.winches.dk

> Andersen makes a 9.5:1.
> Less than that and you are probably talking an ungeared winch.
[quoted text clipped - 9 lines]
> > Thanks,
> > Shaun
Jim Conlin - 20 Jan 2007 20:57 GMT
I had the blue 'Winchers' on the genoa winches of a 35' sloop for 15 years.
They're easier to wrap and unwrap than a self-tailer, but it takes practice
to know when they might slip.  For an application where you'll only want to
pull a couple of feet under load, they're a cheap solution.  As they don't
strip themselves, they're of marginal usefulness for mainsheets or halyards.

> The blue wincher rings as far as I know not worth the try.
>
[quoted text clipped - 13 lines]
> > > Thanks,
> > > Shaun
Charlie Morgan - 20 Jan 2007 21:21 GMT
>The blue wincher rings as far as I know not worth the try.

I have them but only use them occasionally. Even so, they are absolutely worth
every penny when you bang a shin and it's there as a cushion between you and the
winch!

CWM
CAH - 21 Jan 2007 21:14 GMT
> >The blue wincher rings as far as I know not worth the try.
>
> I have them but only use them occasionally. Even so, they are absolutely worth
> every penny when you bang a shin and it's there as a cushion between you and the
> winch!

Well from what I read hear I think they are worth the try, there is a
large price diffence, so even if they just sort of do the job, then
they might be a good deal when price is taken in to consideration. I
belive you can buy them at www.watski.com dealers.

Mads
www.winches.dk
Garland Gray II - 20 Jan 2007 21:33 GMT
Shaun, winchers certainly aren't the equal of self tailers, but they can be
helpful.
And Jim, the only one I've ever had was one I installed on the main halyard
winch on the mast. Mounted on a vertical plane, a partial wrap could easily
batted off every few turns of the handle. It worked much better than with
out as I could winch without pausing to grap higher on the tail. This could
be different with the winch on deck winching a long tail.

> The blue wincher rings as far as I know not worth the try.
>
[quoted text clipped - 16 lines]
>> > Thanks,
>> > Shaun
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.