 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion GroupsBoatsPaddle BoatsSailingCruisingBuildingElectronics Related Topics CarsMotorcyclesMore Topics ... |
Boat Forum / Electronics / September 2007navman 3100 multi conect furuno 1650f
Hi I'm having a problem conecting a new navman 3100 multi (ver.1.4) to a furuno 1650 f ,I'm trying to get the navman to tell me the speed and the depth via the furuno ,I've conected it to 12v and the NMEA cable and the common but it does not show any of the two. I have also check the volt's out going the NMEA cable that reads 2,3 volts.I also tryed reverse the NMEA cables and nothing.On the furuno end I turn on all the sentences on and also the port 1 to NMEA 2.0. Any help would be very appreciated . > Hi > I'm having a problem conecting a new navman 3100 multi (ver.1.4) to a [quoted text clipped - 5 lines] > the sentences on and also the port 1 to NMEA 2.0. > Any help would be very appreciated . The Navman NMEA output is single-ended (one wire) and referenced to ground. The NMEA input on the Furuno most likely is properly designed and thus differential and balanced. Connect the RD-H of the Furuno to the NMEA out of the Navman and the RD-C of the Furuno to the ground of the Navman. Meindert On 12 Set, 11:26, "Meindert Sprang" <m...@NOJUNKcustomORSPAMware.nl> wrote: > > Hi > > I'm having a problem conecting a new navman 3100 multi (ver.1.4) to a [quoted text clipped - 12 lines] > > Meindert Hi The navman doesn't give any signal yet ,I must ask the ground you refer isn't the common is it ,and conecting the RD-H & RH-C wouldon't it send the signal direction to the Furuno equip. Toia > The navman doesn't give any signal yet ,I must ask the ground you > refer isn't the common is it ,and conecting the RD-H & RH-C wouldon't > it send the signal direction to the Furuno equip. Yes, ground or common, it's the same on Navman. So connect the white wire (NMEA Out) to RD-H and the black wire (ground) to RD-C. Meindert |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2010 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.