You are accessing this site in a read-only mode. For full access to all member benefits, including message posting, please login or register. Registration is completely free, simple, and takes only a few seconds.
The message you are replying to and its parents are listed in the reverse order with the most recent posts first. This might not be the whole discussion thread. To read all the messages in this thread please click here.
Re: navman 3100 multi conect furuno 1650f
| Meindert Sprang | 14 Sep 2007 11:11 |
> The navman doesn't give any signal yet ,I must ask the ground you
> refer isn't the common is it ,and conecting the RD-H & RH-C wouldon't
> it send the signal direction to the Furuno equip.
Yes, ground or common, it's the same on Navman. So connect the white wire
(NMEA Out) to RD-H and the black wire (ground) to RD-C.
Meindert
|
| toia | 13 Sep 2007 14:52 |
On 12 Set, 11:26, "Meindert Sprang" <m...@NOJUNKcustomORSPAMware.nl>
wrote:
> > Hi
> > I'm having a problem conecting a new navman 3100 multi (ver.1.4) to a
[quoted text clipped - 12 lines]
>
> Meindert
Hi
The navman doesn't give any signal yet ,I must ask the ground you
refer isn't the common is it ,and conecting the RD-H & RH-C wouldon't
it send the signal direction to the Furuno equip.
Toia
|
| Meindert Sprang | 12 Sep 2007 10:26 |
> Hi
> I'm having a problem conecting a new navman 3100 multi (ver.1.4) to a
[quoted text clipped - 5 lines]
> the sentences on and also the port 1 to NMEA 2.0.
> Any help would be very appreciated .
The Navman NMEA output is single-ended (one wire) and referenced to ground.
The NMEA input on the Furuno most likely is properly designed and thus
differential and balanced. Connect the RD-H of the Furuno to the NMEA out of
the Navman and the RD-C of the Furuno to the ground of the Navman.
Meindert
|
| toia | 12 Sep 2007 00:10 |
Hi
I'm having a problem conecting a new navman 3100 multi (ver.1.4) to a
furuno 1650 f ,I'm trying to get the navman to tell me the speed and
the depth via the furuno ,I've conected it to 12v and the NMEA cable
and the common but it does not show any of the two. I have also check
the volt's out going the NMEA cable that reads 2,3 volts.I also tryed
reverse the NMEA cables and nothing.On the furuno end I turn on all
the sentences on and also the port 1 to NMEA 2.0.
Any help would be very appreciated .
|
Quick links:
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage