Boat Forum / Building / January 2004

When using a rotary cutter for cutting glass material, there are a couple of
brands to consider and also the size of the blade.  Fiskars uses a stainless
steel blade and OLFA uses a tungsten carbon blade which will last three to
four times longer than the Fiskars Tool.  Also, from ...

  More on the Continuing Saga of Far Cove's Engine...
  My engine dealer tells me one difference between the M25 (what I have)
and the M25XPB (what I'm getting) is the exhaust: it's a hose-clamp
fitting rather than a screw-in, and he suggested that the "typical"

Has anyone built or used the Wineglass Wherry offered by Pigmy Boats?
http://www.pygmyboats.com/mall/WGWSPECS.asp
It's an attractive design and light weight too.
Looking to build, just don't know what yet..........

I have been burned by Terrence Jones who has been advertizing viking ship
plans.  He has my money, but no plans are forthcoming.   I paid him $90 for
these plans as well as some supplementary material (photos, etc.) that seem
to be stuff available at varrious web sites for free.

I need 5 to 10 gal of a light low viscosity epoxy [approx 600 cps @ 70
deg Fahrenheit] and have not discovered anything for less than about
$60/gal.
Is that about as good as I'm going to do ?