| Thread | Last Post | Replies |
|
| My boat is made of pure gold ! | 04 Oct 2004 14:19 GMT | 7 |
It's the most expensive boat ever and it will be the pride of the seven seas!
|
| Lead Shot needed | 03 Oct 2004 23:47 GMT | 31 |
I've begun stacking rectangular lead 'pigs' into my internally
ballasted keel cavity. Becuase the pigs ARE retangular, and the keel
is not, there are some 'voids' or 'vacancies' into which I hope to
pour lead shot so as to fill these voids. I figure I'll need a couple
|
| inverter vibration damage??? | 03 Oct 2004 03:04 GMT | 5 |
I got a Coleman PMP 2000 inverter, mounted it to the
rear wall of the hull on a houseboat, and hooked it
to the batteries. It ran a drill for a few trys, so I figured
things were good. I took the boat out, and the next
|
| "Portable" stern thruster?? | 03 Oct 2004 02:37 GMT | 5 |
Anyone know of a stern thruster which could bolt to or through the swim
step? I'm thinking of adding a ST to my GB-32 but would love to be able to
do so without a haulout or serious modfications to the boat.
Thanks,
|
| Question about Outboard Brackets | 03 Oct 2004 00:27 GMT | 1 |
I'm building a 24' powercat. After discussing with another Ken
Hankinson Wildcat builder, I'm thinking about outboard brackets...
http://www.geocities.com/wildcat_sport/alex_davidson.html
Any suggestions are welcomed... Can it be a do it yourself project ???
|
| HOW2 join 2 pieces of stainless steel tubing ? | 02 Oct 2004 16:08 GMT | 9 |
I need to modify the height and width of a bimini frame to fit it to my
boat.
What is recommended to joining the cut 1" frame tubing for sturdiness
and so that it will be smoothe for fitting the top afterwards ?
|
| QUESTION TO THE GROUP | 02 Oct 2004 14:03 GMT | 4 |
Have any of you, or anyone you may know had a poor experience with
Markel American Insurance (marine insurance) and/or an
inspecting/surveying company called "TMS National"?
Ask yourself these questions:
|
| 96 bayliner trophy | 02 Oct 2004 12:40 GMT | 1 |
|
| need help building a wood sailboat, simple questions | 02 Oct 2004 08:45 GMT | 2 |
I am trying to build the "tiny bear" boat (see plan here
http://members.aol.com/polytarp/tbear.htm) but there is a step that I can
not figure out.
I am suposed to put together the bow plate, the transom and a mould frame.
|
| houseboat plans | 02 Oct 2004 04:56 GMT | 5 |
i'd like to buy plans for a static 70-85 foot wide-beamed houseboat (in fact
to create a restaurant).
any suggestions please?
Mike
|
| Port gaskets | 01 Oct 2004 13:15 GMT | 9 |
I am looking for a source for ROUND gaskets for my bronze ports. I
have found the square ones at Defender but the grooves in the ports
are round and the square ones don't seat well no matter what I do. Any
sources will be appreciated. Chuck
|
| Repair to fibreglass boat | 01 Oct 2004 03:08 GMT | 3 |
Please have a look at the hole in this fibreglass boat.
http://www.blueskymarketing.co.uk/boat.htm
professional repairers in UK ( scotland /Glasgow) have proved
too expensive ( £800 ), its an old boat and needs a lot of other
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread