| Thread | Last Post | Replies |
|
| DIY Shrink Wrap | 30 Nov 2003 01:36 GMT | 4 |
A friend and I are thinking of investing in the Dr. Shrink kit and shrink wrapping our Pearson 422's ourselves. (We have both been quoted $800 for the job at our two yards. It seems that we can do it for MUCH less than that ourselves.) I've seen demos and watched them do it at ...
|
| Any Simex sextant owners out there? | 29 Nov 2003 23:14 GMT | 2 |
I just couldn't help myself. I was ogling the bare belly of a 20-yr-old standing at the checkout counter of a local thrift shop whos sweat pants, the only bottoms she had on, had slipped down her tanned hips, and noticed in the display case under the cash register a nice
|
| Low-end GPS | 29 Nov 2003 19:48 GMT | 11 |
At the Work Boat Show (Seattle) on Friday I was looking for a fixed mount GPS to replace my beloved Micrologic Mariner which is showing some senility. I found the Garmin GPS 152 and the Furuno GP-32 and 37. They'd probably do the job. Thing is, though, neither of them has a ...
|
| Go boating and get paid for it! | 29 Nov 2003 16:49 GMT | 2 |
http://www.seasurplus.com/id52.htm
|
| Espar Vs. Webasto Heaters | 28 Nov 2003 23:22 GMT | 6 |
I am interested in installing a Hydronic, (hot water) heating system aboard a Tashiba 40 sailboat. Does anyone have any comments, recommendations or warnings about the two leading brands, Espar and Webasto? Cost is about the same and specifications are also very close. Webasto ...
|
| 1986 BAYLINER | 28 Nov 2003 16:46 GMT | 1 |
LOOKING FOR INFORMATION ON A 2455 CERRIA COMMAND BRIDGE SPEC SHEETS MAG. ADS ETC. OR A PLACE WHERE I CAN FIND SUCH INFORMATION THANKS.............. RDENNIS205@AOL.COM
|
| forward-looking sonar, i.e. horizontal ? | 28 Nov 2003 16:16 GMT | 11 |
Is there such a commercial product or does anyone know of a custom implementation that is documented ? Thanks.
|
| Computerized gauges | 28 Nov 2003 13:34 GMT | 11 |
I've been wondering, what would be involved in having a computer interpret and display gauge readings. By this I mean something such as having a laptop receiving inputs from the various gauge sending units such as oil pressure, engine temp etc. and then
|
| Chrysler 26 keel box | 28 Nov 2003 11:29 GMT | 1 |
Any Chr 26 sailors out there, who have had the keel break the box? After several cable breaks when hitting rocks/sand banks I had a serious leak from the keel box into the cabin.
|
| RE: Calling all Binacle Compass Manufactures | 28 Nov 2003 04:09 GMT | 4 |
Just a point of information. Please look into putting a small weatherproof LED screen, with a hook up for a laptop computer, in the center of you compasses. You'll sell a thousands of them to sailboat owners.
|
| Power steering leak | 28 Nov 2003 03:23 GMT | 4 |
My boat has a 5.7 Volvo Penta engine (GM block) and I have a leak in the power steering system that I cannot seem to find. I can tell that it is coming from somewhere on the pump itself but I do not think it is from any of the connections.
|
| Summary of Our Cruising Southwest Florida Vacation | 27 Nov 2003 04:33 GMT | 3 |
We had fun chartering a sailboat and cruising in Southwest Florida. Here's a review of that trip: http://www.lorendi.com/Florida/summary.htm. Cheers, Margaret & Loren Block Georgetown, TX
|
| boat hull Number and registration | 27 Nov 2003 02:13 GMT | 5 |
several years ago I purchased a sailboat at a us Marshall sale. I recieved documents listing a manufacturer ( one off custom) which was the builders last name and a hull number. I registered the boat in my home state with the numbers given. Now after several years of a major refit ...
|
| Flex-o-fold propellors | 27 Nov 2003 00:57 GMT | 3 |
I am seeking information about 3 blade Flex-O-Fold folding propellers in sailboat installations. My boat is a Pearson 40, Westebeke 4-107, direct drive (1:1 reduction in forward) Paragon transmission connected to a 2:1 reduction V-Drive. The reverse gear in the transmission has a ...
|
| heavy duty kayak rack on 18 foot bayliner Capri | 26 Nov 2003 04:26 GMT | 1 |
I'd like to install a heavy duty (roof) rack on a my bayliner capri 18footer. The rack would have to be long enough and sturdy enough (thinking 1" thick pipes) to allow me to carry an 70 lbs 12 foot long kayak. Is this possible? Who would make/install such a beast?
|