Boat Forum / Electronics / September 2006

I just received a SR162 dual-channel AIS receiver, which I will be using on
my sailboat -- the old single-channel SR161 will end up at home.  I've been
testing at my house it these last couple of days, and have been amazed at
the range I have been getting.  I've seen many ships ...

I have a Garmin 182C that I would like to connect to a new iComm M502.
Which NMEA wires gor to whihc, and what is the easiest method for
making the connections?

I am currently runing Winchart NautiQ and SOB on my laptop, both using C-Map
Max charts. This is also interfaced with nmea data from Raymarine (Depth,
wind etc) and obviously has a GPS input
I am thinking of getting a radar. Can anyone advise me of manufacturers, and

Any 10 SMA Male to SMA Male cable assemblies for $99.00
RG-58C/U or RG-223/U
Mix & match any 10
Length available: 12", 18", 24", 30", 36", 48", 60", 72", 84", & 96"

to the experts,
For my boat I've recently instaled a new Sony radio, 6 CD changer, new
speakers inside and out and a new 4 channel amp. When I raise the
volume the radio or CD start cutting out?

What wefaxs (like PYAA02) should I use while traving from Norfolk,VA to
St Thomas,V.I.
Hanz

Could someone help me where I can find the Lunitidal Interval for
Portuguse citys?
Many thanks in advance.
Kind regards,

What spacing should I have between a Furuno 1623 radar antennae, a
marine VHF whip aerial, a Garmin GPS aerial and a Navtex aerial??
TVMIA

I have a Navico Corus windset. It does not work anymore. Before I send it
to
the manufactory I want to measure if there is a problem with the windset or
the cable. Who knows what I can measure on the cable(colors) or windset? Is

Kathy K has an elderly Furuno radar (1750 I think).  The scanner is a 1.5 KW
open array.  The radar has worked fine until this summer.  Now every once in
a while the display goes dim.  Only the edges of object are bright with
dimmer interiors.  Then after awhile its all bright again ...

What's involved with taking a CANBUS signal and interfacing it with an
NMEA2000 network?  I've got Canbus on the engines and I'd like to bridge
that data into an NMEA2000 network so I can see engine data on the
chartplotter.  I'm aware there are physical connector differences, but ...

I have Bennett trim tabs on my boat, fitted with trimindicators.
The port indicator has ceased to indicate showing full down at all times,
this happened suddenly with no apparent warning. One day in the Seine it
worked and the next in the Bay de Seine it did not.

I would like to purchase a Miniplex41 AIS in either rs-232 or USB version.
This is to work with a Raymarine E120, autopilot with fast heading data out,
Seatalk data, NMEA data in and NMEA data out to VHF and HF radios and an
onboard computer. I also plan to include an AIS ...

Here is an e-book about Solar Electric Power,
which explains how to design & install a complete system.
For more information click here
    http://werkinstif.hatcreek.hop.clickbank.net

Click here,   http://werkinstif.superpro.hop.clickbank.net,   to find out
about an e-book titled, "Understanding and Installing Your Own Solar
Electric System", which includes worksheets, & other resources.
Posted Via Usenet.com Premium Usenet Newsgroup Services