Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsBoatsPaddle BoatsSailingCruisingBuildingElectronics
Related Topics
CarsMotorcyclesMore Topics ...

Boat Forum / Electronics / August 2008



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
log25 Aug 2008 13:24 GMT6
I have a Autohelm Tri Data log and depthsounder.
It has always been no trouble until this year when the log has been playing
up.
It started by being intermittent and now does not indicate at all in normal
Adler-Barbour Cold Machine voltage range.21 Aug 2008 03:15 GMT7
I have a 1982 SFV-1 unit with 16' between the compressor and evaporator
and have just rewired it with 10AWG.
The manual states that the unit shuts down for <10.5v at the terminals
and will restart at >11.5v. Is the 11.5v measured just before the 7.6A
Wiring PA horn output to standard horn?16 Aug 2008 15:54 GMT4
I'd like to wire the PA horn output from a VHF to a trigger a
tradition non-PA horn.  I would think that I could use a relay for
this but could use some guidance with respect to selecting and wiring
the right relay here.
NewBie Grovel Mixed 12v, 240v16 Aug 2008 05:24 GMT1
Hi, thank you for entertaining my humble question.
I plan a near permanent 240v from land on my liveaboard, but
it has just had normal 12v engine battery put in.
Ideally, the finished system would be 12v  or 24v based, with clever
Loran redux03 Aug 2008 08:20 GMT12
with the renewed interest in Loran (eLoran) what suggestions for picking
up a receiver? There are a bunch of them on eBay.
Any enlightenment will be appreciated.
Vic
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.